+44 (0) 1403 713772

Control & Instrumentation Expertise Since 1982

Home » Products » Hawk Measurement Series 2000

Hawk Measurement Series 2000

Principal of Operation

“Intelligent” Pressure and Level Transmitters for all industries

The Series 2000 is a complete range of ‘intelligent’ pressure and level transmitters with local display and adjustment by three push buttons. The push buttons are used to set Zero and Span. Test pressures are not required for calibration.

 

Series 2000
The Series 2000 pressure transmitter has been specially designed for measuring pressure in pulp and paper mills and similar industries where plugging is a problem.

2000-SAN
The 2000-SAN series are designed for all pressure and level measurements in the food and beverage, chemical and pharmaceutical industries. All hygienic process connections are available, most of them are according to the EHEDG, 3-A and FDA regulations.

Series CER-2000 – Peramic S
The Peramic ‘S’, series CER-2000, is a pressure transmitter based on a ceramic measuring sensor. The CER-2000 series is fully temperature compensated and is made for all pressure applications in clean liquids, gases and vapours. The ceramic measuring cell can withstand high overpressures, and is sealed by an o-ring (viton as standard, other materials on request). Zero and span can be adjusted without test pressure over wide ranges, by 3 push buttons or by a hand-held terminal (HART®, option).

Features
• “All Stainless” design
• Easy calibration without test pressure by 3 push buttons
• Accuracy 0.1%
• 4-20 mA and HART® protocol
• ATEX II 1 G and II 1 D
• Wide rangeability
• Local display
• Adjustable damping
• More than 40 different process connections
• Profibus-PA

temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php
temaplte name or ID.php